Samson C01u Driver Mac Os X

Samson's USB Mic FAQs combined (historical)

Using the Samson C01U with Apple Logic (Mac OS X)

Samson C01u Driver Mac Os X10.10

The C01U Pro USB Studio Condenser Microphone from Samson allows you to make high-quality audio recordings to your computer without the need of any additional hardware or cabling. The C01U Pro is USB compatible with any Mac or Windows computer, as well as most DAW software programs, including GarageBand. Description: This classic USB microphone bridges the gap between mid-level USB audio adapters and pro-line products that require additional drivers, special software, and/or excess cabling. The C01U is USB compatible with any Mac or PC, as well as most DAW software programs. Its supreme ability to produce pristine audi.

This is the process of setting up the CO1U to work in Logic. This will only work in OSX 10.4 or later.
10.3 and earlier versions don’t have this facility.

Samson Meteor Driver For Mac Os. And the device under Universal Serial Bus controllers will become Samson C01U. The Samson microphone then shows up under Sound, video and game controllers as USB Audio Device and under Universal Serial Bus controllers as USB Composite Device. Right-click on the devices and select Properties to see the driver. For expanded control you can install the Samson C01U driver software which will give you programmable Gain and the digital Input Meter so you can adjust the internal digital microphone pre-amplifier to the correct level. Page 5: Getting Started With Mac Os X.

  1. Open Audio MIDI Setup (from the Applications/Utilities folder)
  2. Go to the Audio Menu - Open Aggregate Device Editor ⇧⌘A
  3. Click on the + button to create a new device
  4. It's a good idea to rename it (double click on Aggregate Device in the list and enter the new name eg. CO1U)
  5. The list at the bottom of the window will show all the audio devices connected to the computer. Select the ones you want the device to use by checking the “use” button. For instance, if you only have a CO1U connected you will need to check CO1U and Built-in Audio. Check the clock button on one of the devices, not the CO1U.
  6. Click Done

And that’s it. The device will then appear in Logic under Audio Hardware and Drivers as an available I/O.


Using the Samson C01U with Apple Garage Band (Mac OS X)

  1. Plug the Mic into a USB Port
  2. Open Garage Band and Go to Preferences ⌘,
  3. Click on Audio/Midi
  4. Select Samson C01U from the Audio Input drop down list
  5. Click on Yes when it asks if you want to Change audio driver
  6. One the Driver initializes, close the preferences dialog box and Garage Band will be ready to use the C01U.


Using the Samson C01U with Cakewalk Home Studio 2 (Windows)

  1. Plug in the Samson C01U to a USB Port.
  2. Open Cakewalk Home Studio 2.
  3. Go to Options.
  4. Go to Audio.
  5. Go to Advanced.
  6. Under Playback and Recording, select Driver Mode MME32 Bit and click OK.
  7. You will be prompted to restart the program because you switched drivers. Click OK.
  8. After restart, you will be prompted perform a test because of the new driver selection. Click Yes. You will see a screen saying (Analyzing 1 in 1 out). When profile successful, click OK. And the program will open.
  9. Select either a new project or open a existing project.
  10. On the left side under input select, click to select the Samson C01U as an input source. Once you click Record (R) on that channel you will see (Meter) and hear the Samson C01U.


Using The Samson C01U With Sony Sound Forge 7.0 (Windows)

  1. Open Sound Forge 7.0
  2. Press record.
  3. In the record 1 dialog box pull down the Device menu and select the Samson C01U.
  4. Press Arm to start recording.
  5. To control the volume, Go to the windows mixer. Go to Options, Click on Properties, Click on Recording Properties, Pull down the Mixer device menu and select the Samson C01U as a mixer device.
  6. Click OK. A volume control will pop up to adjust the C01U volume.


Using the Samson C01U with Cool Edit (Windows)

  1. Open Cool Edit and click New.
  2. Go to Options and select Samson C01U under Waveform record.
  3. Press the F10 key to monitor the record levels before recording.
  4. Click OK.
  5. To control the volume, Go to the windows mixer. Go to Options, Click on Properties, Click on Recording Properties, Pull down the Mixer device menu and select the Samson C01U as a mixer device.
  6. Click OK. A volume control will pop up to adjust the C01U volume.


Using the Samson C01U with Cakewalk Sonar 4 (Windows)

  1. Plug in the Samson C01U to a USB Port.
  2. Open Cakewalk Sonar.
  3. Go to Options.
  4. Go to Audio.
  5. Go to Advanced.
  6. Under Playback and Recording, select Driver Mode MME32 Bit and click OK.
  7. Click on the Drivers tab and Highlight the Samson C01U under input drivers.
  8. You will be prompted to restart the program because you switched drivers. Click OK.
  9. After restart, you will be prompted perform a test because of the new driver selection. Click Yes. You will see a screen saying (Analyzing 1 in 1 out). When profile successful, click OK. And the program will open.
  10. Select either a new project or open a existing project.
  11. On the left side under input select, click to select (1 in, 1 out) the Samson C01U as an input source.
  12. Select Left Samson C01U.
  13. Once you click Input Echo on that channel you will see (Meter) and hear the Samson C01U. You control the volume with the channel fader.


Using the Samson C01U in Cubase LE (Windows)

  1. Plug the Mic into a USB Port
  2. Open Cubase LE
  3. Open an existing project or start a new project that uses audio
  4. Go to Device
  5. Go to Device Setup
  6. Go to VST Multitrack
  7. Click on Control Panel
  8. In Control Panel you should see the Samson C01U in the Direct Sound Input Port Area.
  9. Click on the Samson C01U and Click Move Up on the right side.
  10. Click OK to comfirm the move.
  11. Click OK at the bottom of the Control Panel to exit the Control Panel
  12. On an Audio Track, Go to the Left side Input Area and Click on Monitor. You should be able to hear the input from the Samson C01U.


Will the C01U microphone work with my computer?
The C01U microphone will work on computers running Windows XP and Apple Mac OS X.
Will the C01U microphone work with my software?
The C01U microphone will work with any software that supports USB Audio Class devices and does not require a proprietary audio driver.
On Mac OS X, how come I can see the meter moving in the Sound Preferences panel but I can’t hear any audio.
The current version of Mac OS X does not support 'play-through' when using a microphone (internal or USB) as your input device. You will need to use a recording or play through or application to hear the microphone.
Does the C01U require phantom power?
The C01U microphone draws all necessary power from the USB bus.
Can I use multiple C01U microphones at the same time?
Yes, provided the audio application allows the use of multiple USB audio devices.
Do I need to use any special software drivers for the CO1U to work?
The C01U is a USB Audio Class compliant device, which means it does not need any special software drivers to work. To use the microphone, you will need an application open that supports USB audio devices.
Can I plug the C01U into my analog mixing console (XLR)?
No, the C01U is a digital microphone and features a USB output, and needs a USB host (computer) to work.
Will the C01U work with USB 1.1?
Yes, the C01U is a USB 2.0 compliant, full-speed device, and is fully compatible with USB 1.1 or 2.0 full-speed ports.
How can I select different sample rates?
Sample rate is determined by the audio application. The microphone can change to sample at 8, 11.025, 22.05, 44.1, and 48 kHz. Applications may support on-the-fly resampling, which would allow other sampling frequencies.

Samson C01u Driver Mac Os X 10.12


USB Condenser Microphone

Photo: Mark Ewing

If you want the simplest possible computer recording setup, it doesn't come much more straightforward than this: a mic that plugs straight into your Mac or PC's USB ports.

Samson's C01U USB condenser microphone is a 'digital' version of their entry-level C01 back-electret, medium-diaphragm studio microphone. The 'digital' tag refers to the fact that it has a built-in analogue-to-digital converter and interface, enabling it to connect to a computer workstation via USB rather than the more usual analogue, balanced XLR cable. It outputs at 16-bit resolution and supports sample rates of 8, 11.025, 22.05, 44.1 and 48kHz. The convenience aspect of a USB microphone is undeniable for those working entirely on computers as it enables recordings to be made without buying any additional soundcard or audio interface, although the computer does need an audio output of some kind in order for you to be able to hear your recordings. The direct USB output also allows the microphone to be used without a separate mic preamplifier or the source of phantom power that condenser mics normally require, as everything is powered from the USB port.

Judging by the specifications and the price, Samson have targetted this microphone at the entry-level home-studio user and multimedia market, as more demanding applications would probably require 24-bit output resolution, although Samson have gone to great lengths to make the best of the 16 bits available. The main limitation of most basic 'digital' microphones of this type is that the internal preamp has a fixed gain prior to the analogue-to-digital conversion stage, so you only get full resolution when the microphone is hearing the maximum signal level it can accept without clipping, but Samson have been quite clever in their design. Singing at an average level, a couple of inches from the C01U, resulted in a peak level of around -20dB, which with a fixed gain structure would knock at least three 'bits' off the available 16-bit resolution. This would be most undesirable, so Samson's engineers have added a two-stage variable analogue gain cell inside the microphone prior to the converter. If you just use the mic as it comes, the computer's own system gain control actually governs the mic's internal gain cell (in the Audio MIDI Setup controls, in the case of Mac OS). However, as documented in the manual, you can also download a control panel applet, called Soft Pre, from the Samson web site, and this can be used to control the internal gain of the mic. Up to +48dB of additional gain is available, and the applet also provides metering, variable-frequency low-cut filtering and a phase invert switch.

The downloadable Soft Pre applet allows software control over the C01U's gain cell and other attributes.Photo: Mark EwingThe Mac OS X Soft Pre applet is currently available as a free download from the Samson web site, although the Windows version was still under development at the time of this review. Mac users running OS 10.4 need to create an Aggregate Audio Device in the Audio MIDI Setup utility so that the Samson's input stream will be added to that of any existing audio interfaces. Those running older versions of Mac OS X can choose the mic as their default audio input. Once I'd installed the applet from the Samson web site and created an Aggregate audio driver, I put the applet control panel in the Dock so I could open it whenever necessary, although the mic was recognised by my system prior to the software installation. Samson tell me they have succeeded in running multiple C01Us via a USB hub, which opens up some interesting possibilities for the future.

Mechanically, the microphone is finished to a very high standard and feels reassuringly solid. It uses a 19mm cardioid back-electret capsule with a three-micron diaphragm, suspended on an internal shockmount. The design follows that of a typical 'classic' side-entry vocal mic and the frequency response is quoted as being flat within 1dB over the audio range. Its maximum SPL is quoted as a perfectly adequate 136dB, but there are no noise specs and, as I recall, one of my concerns with the original C01 was that it was a little noisy by comparison with more costly studio mics unless used for close-miking fairly loud sounds. There are no pad or low-cut switches on the mic, although the applet does provide a very effective low-cut filter with variable cutoff frequency. A green LED on the mic confirms that USB power is being received.

In Use

Once I'd connected the mic, I found there was a slightly higher latency than I expected for the chosen buffer size, and at 44.1kHz, I could still perceive a hint of delay when Logic 's Audio Devices and Drivers page was set to 128 samples, although I think most singers would find this within acceptable limits. This may well have beeen an attribute of the Aggregate driver, but as long as you can work with buffer sizes of 128 samples or under, the latency is fine.

Driver

The Samson C01U requires a common USB-B type plug.Photo: Mark EwingLike the original C01, this mic does produce a low background hiss from its integral circuitry, although not enough to worry about when close-miking loud instruments or strong vocals. The noise is more evident on quieter instruments or voiceover work, but for typical studio applications the C01U can give good, clean results. Far more worrying, however, was a significant level of digital background clutter riding above the hiss when I tested the mic on a dual-processor Mac G5. I asked Samson's UK distributors, Sound Technology, about this and they found they could replicate the problem on some (but not all) tower G5s, whereas all other Macs seemed quite happy. Switching to my G4 iBook confirmed that the digital noise was gone.

Premium CAD software for Mac SketchUp. There are different versions available of this software: SketchUp Free or SketchUp Pro. Like a lot of other. Meshmixer is a 3D drawing software that allows you to work with triangle meshes. It offers various features, including drag-and-drop mesh mixing, 3D sculpting, surface stamping, support for 3D printing. 3d drawing program for mac.

Tonally, the mic is fairly neutral, translating transient details rather better than a similarly priced dynamic mic would. It could certainly be used to record a very respectable vocal track, albeit without the transparency and shimmer of a top-class microphone.

Universal Appeal?

Although unashamedly entry-level, the C01U is quiet and clean enough to record vocals and instruments to a very acceptable standard, provided that they are close-miked, and its performance is well above that of any multimedia mics I've tested. As far as I can tell, the subjective performance of this mic is essentially the same as that of its wired counterpart, and that model has sold well for Samson. The digital noise issue will be a concern if you have a G5 tower-based studio system, but it could be argued that anyone with such a deluxe computer should be looking for a more sophisticated mic anyway!

I'm sure we'll be seeing a lot more USB mics in the future, but in my view, if they're going to approach the performance of a wired mic, they need to follow Samson's lead in providing some form of gain control or at least a choice of switchable gain settings prior to conversion. More serious models will also need a 24-bit output to provide adequate resolution at typical operating levels while still leaving some safety headroom. As it stands, the C01U is a very practical solution for entry-level users who don't have an audio interface and, if used carefully, it can produce commendable results in a wide range of applications provided that the source being recorded isn't too quiet or distant.

Alternatives

Samson C01u Driver Mac Os X

Currently, there are only a couple of other USB-equipped condenser microphones, although this may well prove to be a growth area. SE Electronics' D01 and Blue's Snowball are both rather more expensive than the C01U, but they also offer additional features such as the D01's headphone socket.

Pros

  • Inexpensive.
  • Needs no audio interface or mic preamp.
  • Connects via a conventional USB cable.
  • The downloadable Soft Pre applet installs a pre-conversion gain control that maintains the output resolution at normal operating levels.
  • Included standmount (not a shockmount), USB cable and nylon storage pouch.

Cons

Samson C01u Driver Mac Os X 10.10

  • Basic mic is slightly noisy, though this shouldn't cause problems in normal studio applications.
  • Digital noise does appear to be a significant problem in some Mac G5 systems.

Samson C01u Review

Summary

The C01U is a neat concept. Although it is based on a budget model that doesn't have the same technical specifications as more sophisticated (and more expensive) studio microphones, it can produce impressive results for close-miked vocals and instrument use. Laptop users who record on the move will particularly appreciate the fact that no other audio interface or mic preamp is required.

information

£69 including VAT.

Samson c01u driver windows 10

Sound Technology +44 (0)1462 480000.

Samson C01u Usb Mic Driver

+44 (0)1462 480800.